74ALVCH162245DGG Download

partno	mfr	description	Magnitude	download
74ALVCH162245DGG	PHILIPS	Philips Semiconductors [16-bit bus transceiver with direction pin and 30ohm termination resistor 3-State]	98k

INTEGRATED CIRCUITS 74ALVCH162245 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) Product specification IC24 Data Handbook 1998 Jun 29 Philips Semiconductors Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 FEATURES ? Wide supply voltage range of 1.2V to 3.6V ? Complies with JEDEC standard no. 8-1A ? CMOS low power consumption ? MULTIBYTETM flow-through standard pin-out architecture ? Low inductance multiple VCC and ground pins for minimum noise and ground bounce PIN CONFIGURATION 1DIR 1B0 1B1 GND 1B2 1B3 VCC1 1B4 1B5 1 2 3 4 5 6 7 8 9 48 1OE 47 1A0 46 1A1 45 GND 44 1A2 43 1A3 42 VCC2 41 1A4 40 1A5 39 GND 38 1A6 37 1A7 36 2A0 35 2A1 34 GND 33 2A2 32 2A3 31 VCC2 30 2A4 29 2A5 28 GND 27 2A6 26 2A7 25 2OE ? Direct interface with TTL levels ? Bus hold on all data inputs ? Integrated 30 termination resistor DESCRIPTION The 74ALVCH162245 is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The 74ALVCH162245 features two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for direction control. nOE controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. The 74ALVCH162245 is designed with 30 series resistors in both HIGH and LOW output states. The 74ALVCH162245 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors. GND 10 1B6 11 1B7 12 2B0 13 2B1 14 GND 15 2B2 16 2B3 17 VCC1 18 2B4 19 2B5 20 GND 21 2B6 22 2B7 23 2DIR 24 SW00198 QUICK REFERENCE DATA GND = 0V; Tamb = 25?C; tr = tf 2.5ns SYMBOL tPHL/tPLH CI CI/O CPD PARAMETER Propagation delay An to Bn; Bn to An Input capacitance Input/output capacitance Power dissipation capacitance per buffer VI = GND to VCC1 Outputs enabled Outputs disabled CONDITIONS VCC = 2.5V, CL = 30pF VCC = 3.3V, CL = 50pF TYPICAL 2.4 4.0 8.0 27 4 UNIT ns pF pF pF pF NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in ?W): PD = CPD ? VCC2 ? fi + S (CL ? VCC2 ? fo) where: fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; S (CL ? VCC2 ? fo) = sum of the outputs. ORDERING INFORMATION PACKAGES 48-Pin Plastic SSOP Type III 48-Pin Plastic TSSOP Type II TEMPERATURE RANGE ?40?C to +85?C ?40?C to +85?C OUTSIDE NORTH AMERICA 74ALVCH162245 DL 74ALVCH162245 DGG NORTH AMERICA ACH162245 DL ACH162245 DGG DWG NUMBER SOT370-1 SOT362-1 1998 Jun 29 2 853-2085 19638 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 PIN DESCRIPTION PIN NUMBER 1 2, 3, 5, 6, 8, 9, 11, 12 4, 10, 15, 21, 28, 34, 39, 45 7, 18, 31, 42 13, 14, 16, 17, 19, 20, 22, 23 24 25 36, 35, 33, 32, 30, 29, 27, 26 47, 46, 44, 43, 41, 40, 38, 37 48 SYMBOL 1DIR 1B0 to 1B7 GND VCC 2B0 to 2B7 2DIR 2OE 2A0 to 2A7 1A0 to 1A7 1OE NAME AND FUNCTION Direction control Data inputs/outputs Ground (0V) Positive supply voltage Data inputs/outputs Direction control Output enable input (active LOW) Data inputs/outputs Data inputs/outputs Output enable input (active LOW) LOGIC SYMBOL (IEEE/IEC) 48 1 G3 3 EN1 [BA] 3 EN2 [AB] 2OE 2DIR 25 24 G6 6 EN4 [BA] 6 EN5 [AB] 47 2 2 1A1 1A2 1A3 1A4 1A5 1A6 1A7 2A0 46 44 43 41 40 38 37 36 4 5 2DIR 48 1OE 1B0 2A0 36 24 25 13 2A1 2OE 2B0 2A2 2A3 2A4 2A5 2A6 35 33 32 30 29 27 26 14 16 17 19 20 22 23 2B1 2B2 2B3 2B4 2B5 2B6 2B7 3 5 6 8 9 11 12 13 1B1 1B2 1B3 1B4 1B5 1B6 1B7 2B0 1OE 1DIR 1A0 1 1B0 LOGIC SYMBOL 1DIR 1 1A0 47 2 1A1 46 3 1B1 2A1 35 14 2B1 1A2 44 5 1B2 2A2 33 16 2B2 2A7 1A3 43 6 1B3 2A3 32 17 2B3 SW00196 1A4 41 8 1B4 2A4 30 19 2B4 BUS HOLD CIRCUIT VCC 1A5 40 9 1B5 2A5 29 20 2B5 1A6 38 11 1B6 2A6 27 22 2B6 1A7 37 12 1B7 2A7 26 23 2B7 Data Input To internal circuit SW00197 FUNCTION TABLE INPUTS nOE L L H nDIR L H X INPUTS/OUTPUT nAn A=B inputs Z nBn inputs B=A Z SW00044 H = HIGH voltage level L = LOW voltage level X = don't care Z = high impedance OFF?state 1998 Jun 29 3 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL PARAMETER DC supply voltage 2.5V range (for max. speed performance @ 30 pF output load) VCC DC supply voltage 3.3V range (for max. speed performance @ 50 pF output load) DC Input voltage range DC output voltage range Operating free-air temperature range Input rise and fall times VCC = 2.3 to 3.0V VCC = 3.0 to 3.6V CONDITIONS MIN 2.3 3.0 0 0 ?40 0 0 MAX 2.7 V 3.6 VCC VCC +85 20 10 V V ?C ns/V UNIT VI VO Tamb tr, tf ABSOLUTE MAXIMUM RATINGS In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) SYMBOL VCC IIK VI IOK VO IO IGND, ICC Tstg PTOT PARAMETER DC supply voltage DC input diode current DC in ut voltage input DC output diode current DC output voltage DC output source or sink current DC VCC or GND current Storage temperature range Power dissipation per package ?plastic medium-shrink (SSOP) ?plastic thin-medium-shrink (TSSOP) For temperature range: ?40 to +125 ?C above +55?C derate linearly with 11.3 mW/K above +55?C derate linearly with 8 mW/K VI t0 For data inputs with bus hold1 For control pins1 VO uVCC or VO t 0 Note 1 VO = 0 to VCC CONDITIONS RATING ?0.5 to +4.6 ?50 ?0.5 to VCC +0.5 ?0.5 to +4.6 "50 ?0.5 to VCC +0.5 "50 "100 ?65 to +150 850 600 UNIT V mA V mA V mA mA ?C mW NOTE: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 1998 Jun 29 4 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions. Voltage are referenced to GND (ground = 0 V). LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40?C to +85?C MIN VIH HIGH level Input voltage VCC = 2.3 to 2.7V VCC = 2.7 to 3.6V LOW level Input voltage VCC = 2.3 to 2.7V VCC = 2.7 to 3.6V VCC = 2 3 to 3 6V; VI = VIH or VIL; IO = ?100?A 100?A 2.3 3.6V; VCC = 2.3V; VI = VIH or VIL; IO = ?4mA VCC = 2.3V; VI = VIH or VIL; IO = ?6mA VOH HIGH level output voltage VCC = 2.7V; VI = VIH or VIL; IO = ?4mA VCC = 2.7V; VI = VIH or VIL; IO = ?8mA VCC = 3.0V; VI = VIH or VIL; IO = ?6mA VCC = 3.0V; VI = VIH or VIL; IO = ?12mA VCC = 2 3 to 3 6V; VI = VIH or VIL; IO = 100?A 2.3 3.6V; VCC = 2.3V; VI = VIH or VIL; IO = 4mA VCC = 2.3V; VI = VIH or VIL; IO = 6mA VOL LOW level output voltage VCC = 2.7V; VI = VIH or VIL; IO = 4mA VCC = 2.7V; VI = VIH or VIL; IO = 8mA VCC = 3.0V; VI = VIH or VIL; IO = 6mA VCC = 3.0V; VI = VIH or VIL; IO = 12mA II IOZ ICC ICC IBHL2 Input leakage current per data pin with bus hold 3-State output OFF-state current Quiescent supply current Additional quiescent supply current given per data I/O pin with bus hold Bus hold LOW sustaining current VCC = 2 3 to 3 6V; 2.3 3.6V; VI = VCC or GND VCC = 2.3 to 3.6V; VI = VIH or VIL; VO = VCC or GND VCC = 2.3 to 3.6V; VI = VCC or GND; IO = 0 VCC = 2.3V to 3.6V; VI = VCC ? 0.6V; IO = 0 VCC = 2.3V; VI = 0.7V VCC = 3.0V; VI = 0.8V Bus hold HIGH sustaining current Bus hold LOW overdrive current Bus hold HIGH overdrive current VCC = 2.3V; VI = 1.7V VCC = 3.0V; VI = 2.0V VCC = 3.6V VCC = 3.6V 45 75 ?45 ?75 500 ?500 ?175 VCC*0.2 02 VCC*0.4 VCC*0.6 VCC*0.5 VCC*0.7 VCC*0.6 VCC*1.0 1.7 2.0 TYP1 1.2 V 1.5 1.2 1.5 VCC VCC*0.11 VCC*0.17 VCC*0.09 VCC*0.19 VCC*0.13 VCC*0.27 GND 0.07 0.11 0.06 0.13 0.09 0.19 0.1 0.1 0.2 150 ? 150 0.20 0 20 0.40 0.55 0.40 0.60 0.55 0.80 5 10 40 750 ? ?A ?A ?A ?A ?A V V 0.7 V 0.8 MAX UNIT VIL IBHH2 IBHLO2 IBHHO2 ?A ?A ?A NOTES: 1. All typical values are at Tamb = 25?C. 2. Valid for data inputs of bus hold parts. 1998 Jun 29 5 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 AC CHARACTERISTICS FOR VCC = 2.3V TO 2.7V RANGE GND = 0V; tr = tf 2.0ns; CL = 30pF SYMBOL LIMITS PARAMETER Propagation delay nAn to nBn; nBn to nAn 3-State output enable time nOE to nAn; nOE to nBn 3-State output disable time nOE to nAn; nOE to nBn WAVEFORM MIN tPHL/tPLH tPZH/tPZL tPHZ/tPLZ 1, 3 2, 3 2, 3 1.0 1.0 1.0 VCC = 2.3 to 2.7V TYP1, 2 2.5 2.9 3.0 MAX 4.9 6.8 6.3 ns ns ns UNIT NOTES: 1. All typical values are measured Tamb = 25?C. 2. Typical value is measured at VCC = 2.5V AC CHARACTERISTICS FOR VCC = 3.0V TO 3.6V RANGE AND VCC = 2.7V GND = 0V; tr = tf 2.5ns; CL = 50pF SYMBOL LIMITS PARAMETER Propagation delay nAn to nBn; nBn to nAn 3-State output enable time nOE to nAn; nOE to nBn 3-State output disable time nOE to nAn; nOE to nBn WAVEFORM VCC = 3.3 ? 0.3V MIN tPHL/tPLH tPZH/tPZL tPHZ/tPLZ 1, 3 2, 3 2, 3 1.0 1.0 1.0 TYP1, 2 2.4 3.0 2.6 MAX 4.2 5.6 5.5 MIN 1.0 1.0 1.0 VCC = 2.7V TYP1 2.7 3.9 2.9 MAX 4.7 6.7 5.7 ns ns ns UNIT NOTES: 1. All typical values are measured Tamb = 25?C. 2. Typical value is measured at VCC = 3.3V 1998 Jun 29 6 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 AC WAVEFORMS FOR VCC = 2.3V TO 2.7V AND VCC < 2.3V RANGE VM = 0.5 VCC VX = VOL + 0.15V VY = VOH ?0.15V VOL and VOH are the typical output voltage drop that occur with the output load. V =V CC I TEST CIRCUIT VCC S1 2 * VCC Open GND VI PULSE GENERATOR RT D.U.T. VO RL = 500 AC WAVEFORMS FOR VCC = 3.0V TO 3.6V AND VCC = 2.7V RANGE VM = 1.5 V VX = VOL + 0.3V VY = VOH ?0.3V VOL and VOH are the typical output voltage drop that occur with the output load. V = 2.7V I VI An, Bn INPUT GND tPHL VOH Bn, An OUTPUT VOL VM tPLH VM CL RL = 500 Test Circuit for switching times DEFINITIONS RL = Load resistor CL = Load capacitance includes jig and probe capacitance RT = Termination resistance should be equal to ZOUT of pulse generators. SWITCH POSITION TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open 2 < VCC GND VCC < 2.7V 2.7?3.6V VI VCC 2.7V SV00906 SW00063 Waveform 3. Load circuitry for switching times Waveform 1. Input (nAn, nBn) to output (nBn, nAn) propagation delay times VI OE INPUT GND VM tPLZ VCC OUTPUT LOW-to-OFF OFF-to-LOW VOL tPHZ VOH OUTPUT HIGH-to-OFF OFF-to-HIGH GND outputs enabled outputs disabled VY tPZL VM VX tPZH VM outputs enabled SW00064 Waveform 2. 3-State enable and disable times 1998 Jun 29 7 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1 1998 Jun 29 8 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1 1998 Jun 29 9 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 NOTES 1998 Jun 29 10 Philips Semiconductors Product specification 16-bit bus transceiver with direction pin and 30 termination resistor (3-State) 74ALVCH162245 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088?3409 Telephone 800-234-7381 ? Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Date of release: 06-98 Document order number: 9397-750-04539 Philips Semiconductors yyyy mmm dd 11 http://www.icinfo.net http://pdf.ecgoo.net

Related Electronics Part Number

partno	mfr	description	Magnitude	download
74ALVCH162245	IDT	Integrated Device Technology [3.3V CMOS 16-BIT BUS TRANSCIEVER WITH 3-STATE OUTPUTS AND BUS-HOLD]	104k
74ALVCH162245	PHILIPS	Philips Semiconductors [16-bit bus transceiver with direction pin and 30ohm termination resistor 3-State]	98k
74ALVCH162245DGG	PHILIPS	Philips Semiconductors [16-bit bus transceiver with direction pin and 30ohm termination resistor 3-State]	98k